Microchip DSC60XX series MEMS XO (Standard) oscillator, 1 MHz to 80 MHz programmable frequency, CMOS output, 1.71 V to 3.63 V supply, AEC-Q100 rated, 4-SMD no-lead package, obsolete status.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC60XX |
| Mounting | Surface Mount |
| Supply voltage | 1.71V ~ 3.63V |
| Current - supply | 1.3mA (Typ) |
| Current - supply (Disable) | 12 µA |
| Available frequency range | 1 MHz ~ 80 MHz |
| Frequency stability (Total) | ±25ppm |
| Operating temperature | -20°C~70°C |
| Size (Dimension) | 0.063\" L x 0.047\" W (1.60mm x 1.20mm) |
| Height - seated | 0.035\" (0.89mm) |
| Output | CMOS |
| Package | Bulk |
| Ratings | AEC-Q100 |
| Function | Enable/Disable |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
With a typical supply current of 1.3 mA and a disable current of 12 µA, it suits low-power always-on modules where the enable/disable function gates the oscillator when the system sleeps.
Housed in a 4-SMD, No Lead package measuring 1.60 mm x 1.20 mm with a seated height of 0.89 mm. The 0.063" x 0.047" footprint is common among MEMS oscillators in the DSC60XX family.
The 4-SMD, No Lead package is a common MEMS oscillator footprint, but the enable/disable function may map to a different pin than other DSC60XX variants. Confirm the pinout against the datasheet before assuming drop-in compatibility.