Microchip DSC400 series MEMS-based XO (Standard), four LVCMOS outputs: 25 MHz, 24 MHz, 24 MHz, 25 MHz, ±25 ppm stability, 2.25 V–3.6 V supply, -20°C to 70°C, 20-VFQFN exposed-pad package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC400 |
| Supply voltage | 2.25V ~ 3.6V |
| Frequency stability | ±25ppm |
| Frequency - output 1 | 25MHz |
| Frequency - output 2 | 24MHz |
| Frequency - output 3 | 24MHz |
| Frequency - output 4 | 25MHz |
| Operating temperature | -20°C~70°C |
| Height | 0.035\" (0.90mm) |
| Size (Dimension) | 0.197\" L x 0.126\" W (5.00mm x 3.20mm) |
| Output | LVCMOS |
| Package | Tape & Reel (TR) |
| Function | Enable/Disable |
| Base resonator | MEMS |
| Case | 20-VFQFN Exposed Pad |
Runs on a 2.25 V to 3.6 V supply, covering both 2.5 V and 3.3 V logic rails without an external regulator.
Housed in a 20-VFQFN with exposed pad (5.00 mm x 3.20 mm, 0.90 mm height).
Listed as Active by Microchip.
Yes — the base resonator is MEMS, not quartz. This gives improved resistance to mechanical shock and vibration, and faster startup compared to a crystal-based oscillator.
Four LVCMOS outputs: two at 25 MHz and two at 24 MHz.