Microchip DSC2311 series, XO (Standard), MEMS base resonator, dual 130 MHz CMOS outputs, ±25 ppm stability, 2.25-3.6 V supply, -40°C to 85°C, 6-VDFN package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC2311 |
| Supply voltage | 2.25V ~ 3.6V |
| Current - supply (Disable) | 23 mA |
| Frequency stability | ±25ppm |
| Frequency - output 1 | 130MHz |
| Frequency - output 2 | 130MHz |
| Operating temperature | -40°C~85°C |
| Height | 0.035\" (0.90mm) |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Output | CMOS |
| Package | Tube |
| Function | Enable/Disable |
| Base resonator | MEMS |
| Case | 6-VDFN |
Supply voltage spans 2.25 V to 3.6 V, so the same part runs off a 2.5 V or 3.3 V rail without a separate regulator — the enable/disable pin lets the system shut down the oscillator when the clock tree is idle, pulling 23 mA max in the disabled state.
Housed in a 6-VDFN package measuring 2.50 mm x 2.00 mm with a seated height of 0.90 mm.
Both outputs run at 130 MHz. The two lanes are identical in frequency, so this part serves a dual-clock application where the same rate feeds two receivers.
Yes — the output is CMOS, and the device includes an enable/disable function. When disabled, the maximum supply current drops to 23 mA.