Microchip Technology DSC2311KI2-R0001, XO (Standard) MEMS oscillator, dual 127MHz CMOS outputs, ±25ppm stability, 2.25V–3.6V supply, -40°C to 85°C, 6-VDFN package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC2311 |
| Supply voltage | 2.25V ~ 3.6V |
| Current - supply (Disable) | 23 mA |
| Frequency stability | ±25ppm |
| Frequency - output 1 | 127MHz |
| Frequency - output 2 | 127MHz |
| Operating temperature | -40°C~85°C |
| Height | 0.035\" (0.90mm) |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Output | CMOS |
| Package | Tube |
| Function | Enable/Disable |
| Base resonator | MEMS |
| Case | 6-VDFN |
Supply voltage spans 2.25 V to 3.6 V, so the same part works on a 2.5 V FPGA bank or a 3.3 V logic rail without a level translator.
Housed in a 6-VDFN package measuring 2.50 mm x 2.00 mm with a seated height of 0.90 mm.
No direct pin-compatible second source is documented, but the DSC2311 series includes multiple frequency and stability variants if the BOM requires a different output frequency.
Yes. The supply voltage range is 2.25 V to 3.6 V, so both 2.5 V and 3.3 V rails are within spec without an external regulator.