Microchip DSC2311KI1-R0051T, MEMS XO (Standard), dual 26 MHz CMOS outputs, ±50 ppm stability, 2.25-3.6 V supply, -40°C to 85°C, 6-VDFN package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC2311 |
| Supply voltage | 2.25V ~ 3.6V |
| Current - supply (Disable) | 23 mA |
| Frequency stability | ±50ppm |
| Frequency - output 1 | 26MHz |
| Frequency - output 2 | 26MHz |
| Operating temperature | -40°C~85°C |
| Height | 0.035\" (0.90mm) |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Function | Enable/Disable |
| Base resonator | MEMS |
| Case | 6-VDFN |
The 2.25 V to 3.6 V supply range lets this oscillator run directly from a 2.5 V or 3.3 V rail without an intermediate LDO — the CMOS output swing tracks the supply voltage.
Housed in a 6-VDFN package measuring 2.50 mm x 2.00 mm with a 0.90 mm seated height, this oscillator fits under low-profile heatsinks or in card-edge assemblies where vertical clearance is tight.
Yes, the supply voltage range is 2.25 V to 3.6 V, so a 3.3 V rail is within spec. The CMOS output swings rail-to-rail, so the logic-high level matches the supply.