Dual-frequency MEMS XO — one can where you used two
The DSC2011FI2-F0017T is a MEMS-based XO that delivers two independent CMOS clock outputs from a single 14-VFQFN package: a fixed 24 MHz reference plus a second output selectable at 100 MHz or 200 MHz. This collapses two oscillator slots on the BOM into one device, saving board area and reducing procurement line items.
Supply, output, and disable logic
Supply voltage spans 2.25 V to 3.6 V, covering both 2.5 V and 3.3 V logic rails without an external regulator. Output is CMOS, so the swing rail-to-rail on the supply. No termination resistors or AC-coupling caps needed for short PCB traces to the load — the driver is strong enough to fan out to two or three CMOS inputs within a few inches.