Microchip DSC2010FI2-A0021T, XO (Standard), MEMS base, LVCMOS output, four selectable frequencies 12/16/25/27 MHz, ±25 ppm stability, 2.25-3.6 V supply, -40°C to 85°C, 14-VFQFN exposed pad, active production.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC2010 |
| Voltage | 2.25V ~ 3.6V |
| Current - supply | 35mA |
| Current - supply (Disable) | 23 mA |
| Frequency stability | ±25ppm |
| Frequency - output 1 | 12MHz, 16MHz, 25MHz, 27MHz |
| Operating temperature | -40°C~85°C |
| Height | 0.035\" (0.90mm) |
| Size (Dimension) | 0.126\" L x 0.098\" W (3.20mm x 2.50mm) |
| Output | LVCMOS |
| Package | Tape & Reel (TR) |
| Function | Enable/Disable |
| Base resonator | MEMS |
| Case | 14-VFQFN Exposed Pad |
The DSC2010FI2-A0021T packs four output frequencies — 12 MHz, 16 MHz, 25 MHz, and 27 MHz — into a single 3.2×2.5 mm 14-VFQFN package. Instead of stocking four separate crystal cans, you configure the output via the enable/disable pin and supply rail.
Product status is Active.
It outputs four selectable frequencies: 12 MHz, 16 MHz, 25 MHz, and 27 MHz, all at LVCMOS levels. The specific frequency is configured via the enable/disable function and supply voltage.
Functionally yes — it is an XO (Standard) with LVCMOS output, so it replaces a quartz-based oscillator in the same socket if the package footprint (14-VFQFN, 3.2×2.5 mm) and pinout match. The MEMS base gives faster start-up and better shock resistance than quartz, but verify the enable/disable logic polarity against your existing design.