Microchip Technology DSC150X series, XO (Standard), 8 MHz, LVCMOS output, ±20 ppm frequency stability, 1.8V supply, -40°C to +85°C, 4-VDFN exposed pad package, Tape & Reel
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC150X |
| Mounting | Surface Mount |
| Voltage | 1.8V |
| Current - supply | 7.5mA |
| Current - supply (Disable) | 1µA (Typ) |
| Frequency | 8 MHz |
| Frequency stability | ±20ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.276\" L x 0.197\" W (7.00mm x 5.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | LVCMOS |
| Package | Tape & Reel (TR) |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-VDFN Exposed Pad |
Running from a 1.8V supply rail, it draws a maximum of 7.5 mA when active — a tight power budget for a 1.8V-only MCU or FPGA bank.
The 1 µA typical standby current keeps the oscillator from dominating the battery budget in a power-gated design.
In Standby (Power Down) mode the supply current is 1 µA typical, with a maximum disable current of 1 µA. This makes it suitable for battery-powered designs where the oscillator must be gated off between active periods.