Microchip DSC1502AI3A-66M66670T, DSC150X series, XO (Standard), 66.6667 MHz, LVCMOS output, ±20 ppm stability, -40°C to +85°C, 2.5V-3.3V supply, 4-VDFN exposed pad package, standby power-down function.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC150X |
| Mounting | Surface Mount |
| Voltage | 2.5V ~ 3.3V |
| Current - supply | 7.5mA |
| Current - supply (Disable) | 1.8µA (Typ) |
| Frequency | 66.6667 MHz |
| Frequency stability | ±20ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.276\" L x 0.197\" W (7.00mm x 5.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | LVCMOS |
| Package | Tape & Reel (TR) |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-VDFN Exposed Pad |
The supply voltage spans 2.5V to 3.3V, so the same oscillator can serve a 2.5V FPGA bank or a 3.3V Ethernet PHY without a separate regulator or level translator.
The 4-VDFN exposed-pad package (7.00 mm x 5.00 mm, 0.90 mm seated height) is a standard MEMS oscillator footprint; the exposed pad should be soldered to a ground-plane thermal land for best thermal and electrical performance.
The DSC1502AI3A-66M66670T is an active Microchip XO oscillator. We source it through independent distribution — submit an RFQ with your target quantity and target price, and we will confirm current availability and a firm quote. No stock-holding claim is made here; every order is quoted to order.
The evidence does not explicitly list a RoHS compliance status. For a definitive answer, request the manufacturer's RoHS/REACH certificate through the RFQ process — we can obtain it from the supply chain.
When the enable pin is driven low, the oscillator enters a standby (power-down) mode that reduces supply current to 1.8 µA typical. The output goes high-impedance. Re-asserting the enable pin restarts the MEMS resonator and brings the output back to the specified frequency within the start-up time — no crystal warm-up delay.
The supply voltage range is 2.5V to 3.3V. The oscillator will operate correctly at any voltage within that window, so it can be powered from a 2.5V or 3.3V rail without an external regulator.