Skip to main content
Log in
Microchip Technology DSC1502AI3A-4M000000T — Crystals & Oscillators

DSC1502AI3A-4M000000T MEMS XO – 4 MHz LVCMOS, ±20 ppm

MPNDSC1502AI3A-4M000000T
Active

Microchip Technology DSC1502AI3A-4M000000T, XO (Standard), 4 MHz LVCMOS, ±20 ppm stability, -40°C to 85°C, 2.5V-3.3V supply, 4-VDFN exposed pad, MEMS base resonator.

Microchip Technology DSC1502AI3A-4M000000T datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1502AI3A-4M000000T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC150X
MountingSurface Mount
Voltage2.5V ~ 3.3V
Current - supply7.5mA
Current - supply (Disable)1.8µA (Typ)
Frequency4 MHz
Frequency stability±20ppm
Operating temperature-40°C~85°C
Size (Dimension)0.276\" L x 0.197\" W (7.00mm x 5.00mm)
Height - seated0.035\" (0.90mm)
OutputLVCMOS
PackageTape & Reel (TR)
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-VDFN Exposed Pad

Product details

4 MHz LVCMOS clock source with ±20 ppm stability

The DSC1502AI3A-4M000000T: This stability holds the clock edge jitter tight enough for UART baud-rate generation, SPI timing, and general-purpose MCU clocking without needing a TCXO.

The supply voltage range spans 2.5V to 3.3V, covering the common logic rails used in 3.3V and 2.5V systems without an extra regulator.

Microchip lists the DSC1502AI3A-4M000000T as Active.

4-VDFN exposed pad — layout and soldering note

The 4-VDFN exposed pad package (7.00 mm x 5.00 mm body, 0.90 mm seated height) requires a thermal land pattern on the PCB for proper heat dissipation and mechanical stability.

Frequently asked questions

What package and footprint does the DSC1502AI3A-4M000000T use?

It comes in a 4-VDFN exposed pad package measuring 7.00 mm x 5.00 mm with a seated height of 0.90 mm. The exposed pad requires a thermal land pattern on the PCB for heat dissipation.