Microchip Technology DSC150X series, XO (Standard), 100 MHz, LVCMOS output, ±20 ppm frequency stability, -40°C to 85°C, 7.5 mA supply max, 4-VDFN exposed pad package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC150X |
| Mounting | Surface Mount |
| Voltage | 2.5V ~ 3.3V |
| Current - supply | 7.5mA |
| Current - supply (Disable) | 1.8µA (Typ) |
| Frequency | 100 MHz |
| Frequency stability | ±20ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.276\" L x 0.197\" W (7.00mm x 5.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | LVCMOS |
| Package | Tape & Reel (TR) |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-VDFN Exposed Pad |
At 100 MHz the oscillator draws 7.5 mA max from a 2.5V to 3.3V rail — low enough to run from a small LDO without thermal worry.
Housed in a 4-VDFN with exposed pad, 7.00 mm × 5.00 mm body, 0.90 mm seated height — the pad under the package needs a thermal via stitch to the ground plane for heat sinking.
Design engineers validating fit need to match pinout with PCB layout before adoption.
Sourcing buyers need to confirm immediate availability to avoid production delays.
Cost is a primary factor for buyer approval and budget planning.
Regulatory compliance is mandatory for many end products; non-compliance can block procurement.
Lead time affects production scheduling and inventory management.
Designers and buyers evaluate substitutes for cost, availability, or performance optimization.