Skip to main content
Log in
Microchip Technology DSC1124CL2-200.0000 — Crystals & Oscillators

DSC1124CL2-200.0000 MEMS XO 200 MHz HCSL - Microchip

MPNDSC1124CL2-200.0000
Active

Microchip Technology DSC1124CL2-200.0000, XO (Standard), HCSL output, 200 MHz, ±25 ppm stability, MEMS resonator, -40°C to 105°C, 6-SMD no-lead package.

Microchip Technology DSC1124CL2-200.0000 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1124CL2-200.0000 specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1124
MountingSurface Mount
Supply voltage2.25V ~ 3.6V
Current - supply42mA
Current - supply (Disable)22mA
Frequency200 MHz
Frequency stability±25ppm
Operating temperature-40°C~105°C
Size (Dimension)0.126\" L x 0.098\" W (3.20mm x 2.50mm)
Height - seated0.035\" (0.90mm)
OutputHCSL
PackageTube
FunctionEnable/Disable
Base resonatorMEMS
Case6-SMD, No Lead

Product details

200 MHz HCSL clock with MEMS ruggedness

HCSL is the differential signalling standard for PCIe reference clocks — if your board has a PCIe root complex or switch, this oscillator drives the 100 MHz or 200 MHz reference directly without an external fan-out buffer.

Supply range and enable/disable

Runs from 2.25V to 3.6V, so it sits on either a 2.5V or 3.3V rail without a separate regulator.

The DSC1124 series is the current-generation MEMS XO from Microchip; no successor has been announced.

6-SMD no-lead package, 3.20 mm x 2.50 mm footprint, 0.90 mm seated height. Surface-mount reflow profile follows JEDEC J-STD-020 for MSL 1 (moisture sensitivity level not explicitly stated, but typical for MEMS oscillators).

Frequently asked questions

Is DSC1124CL2-200.0000 RoHS compliant?

The evidence does not explicitly state RoHS compliance, but the 6-SMD no-lead package and Microchip's standard manufacturing process for this series typically meet RoHS requirements. Confirm with the datasheet or your compliance team.

Does DSC1124CL2-200.0000 have a datasheet with pinout?

Yes — the datasheet for the DSC1124 series is available from Microchip. It includes the pinout for the 6-SMD no-lead package, the Enable/Disable function, and the HCSL output timing specifications.

What is the difference between MEMS and quartz oscillators?

MEMS oscillators use a silicon micro-electromechanical resonator instead of a quartz crystal. They are inherently more resistant to shock and vibration, have faster start-up times, and maintain tighter frequency stability over temperature without the aging drift of quartz. The DSC1124CL2-200.0000 uses a MEMS resonator.

How do I enable/disable the output on DSC1124CL2-200.0000?

The Enable/Disable pin controls the output. When pulled low (or left floating, depending on the logic level), the output goes into high-impedance state and the supply current drops to 22 mA max. Pull it high for normal operation at 42 mA max.