Microchip Technology DSC1124, XO (Standard), 24 MHz, HCSL output, ±25 ppm stability, 6-VDFN surface-mount package, -40 to +105°C operating range.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1124 |
| Mounting | Surface Mount |
| Supply voltage | 2.25V ~ 3.6V |
| Current - supply | 42mA |
| Current - supply (Disable) | 22mA |
| Frequency | 24 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C ~ 105°C |
| Size (Dimension) | 0.126\" L x 0.098\" W (3.20mm x 2.50mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | HCSL |
| Package | Tape & Reel (TR) |
| Function | Enable/Disable |
| Base resonator | MEMS |
| Case | 6-VDFN |
HCSL is a differential, low-swing signal typically used to clock PCIe interfaces, networking ASICs, and high-speed converters — it keeps the edge rate clean and the jitter band tight.
Housed in a 6-VDFN package measuring 3.20 mm x 2.50 mm with a seated height of 0.90 mm.
Submit an RFQ with your target quantity and delivery window; availability and pricing are confirmed per order.
Yes, if the downstream receiver expects an HCSL input. A standard crystal oscillator typically outputs a CMOS or LVCMOS single-ended signal — the HCSL differential output of this MEMS XO is not directly compatible with a single-ended clock input without a level translator or AC-coupling. Check the clock input buffer type on your ASIC or FPGA before substituting.