Skip to main content
Log in
Microchip Technology DSC1124BI5-100.0000 — Crystals & Oscillators

DSC1124BI5-100.0000 100 MHz HCSL MEMS Oscillator

MPNDSC1124BI5-100.0000
Active

Microchip Technology DSC1124BI5-100.0000, 100 MHz XO (Standard), HCSL output, ±10 ppm stability, -40°C to 85°C, 6-SMD No Lead package, MEMS resonator

$4.0050Ref. price · indicative, final on quote
Microchip Technology DSC1124BI5-100.0000 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1124BI5-100.0000 specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1124
MountingSurface Mount
Voltage2.25V ~ 3.6V
Current - supply42mA
Current - supply (Disable)22mA
Frequency100 MHz
Frequency stability±10ppm
Operating temperature-40°C~85°C
Size (Dimension)0.197\" L x 0.126\" W (5.00mm x 3.20mm)
Height - seated0.035\" (0.90mm)
OutputHCSL
PackageTube
FunctionEnable/Disable
Base resonatorMEMS
Case6-SMD, No Lead

Product details

100 MHz HCSL MEMS oscillator for timing-critical boards

The DSC1124BI5-100.0000 is a 100 MHz XO (Standard) from Microchip's DSC1124 series, built on a MEMS resonator rather than a quartz crystal. It delivers an HCSL output — the differential current-mode logic common in PCIe reference clocks and high-speed SerDes — across a supply range of 2.25 V to 3.6 V.

Enable/Disable pin and power budget

Maximum supply current when enabled is 42 mA; with the output disabled it drops to 22 mA — useful for power-gating clock trees in battery-backed line cards or fan-out buffers.

Package, footprint, and layout fit

Housed in a 6-SMD, No Lead package measuring 5.00 mm x 3.20 mm with a seated height of 0.90 mm. The pad layout matches the industry-standard 5.0 x 3.2 mm quartz oscillator footprint — no board spin needed when replacing a quartz XO with this MEMS part.

Frequently asked questions

Is the DSC1124BI5-100.0000 a MEMS oscillator, and does it drop into a standard quartz footprint?

Yes — the base resonator is MEMS, not quartz. The 6-SMD, No Lead package (5.00 mm x 3.20 mm) uses the same pad layout as standard 5.0 x 3.2 mm quartz oscillators, so it is footprint-compatible without a board layout change.

What is the output type and voltage supply range for this part?

Output is HCSL (differential current-mode logic). Supply voltage range is 2.25 V to 3.6 V, covering common 2.5 V and 3.3 V rails.

Does the DSC1124BI5-100.0000 have an enable/disable pin?

Yes, the function is Enable/Disable. When disabled, maximum supply current drops from 42 mA to 22 mA.

Can this MEMS oscillator replace an Epson or NDK 100 MHz HCSL quartz oscillator?

Functionally yes — same 100 MHz HCSL output, same 5.0 x 3.2 mm footprint, and wider supply range (2.25 V to 3.6 V). The ±10 ppm stability over -40°C to 85°C is comparable to or better than many quartz XOs. Verify the Enable/Disable logic polarity matches your design; the DSC1124 series uses a standard active-low or active-high pin depending on the suffix.