Microchip DSC1123 series MEMS XO, 150 MHz LVDS output, ±25 ppm stability, AEC-Q100 qualified, -40°C to 85°C, 2.25V–3.63V supply, 6-SMD no-lead package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1123 |
| Mounting | Surface Mount |
| Supply voltage | 2.25V ~ 3.63V |
| Current - supply | 32mA |
| Current - supply (Disable) | 22mA |
| Frequency | 150 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.276\" L x 0.197\" W (7.00mm x 5.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | LVDS |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Enable/Disable |
| Base resonator | MEMS |
| Case | 6-SMD, No Lead |
LVDS output at 150 MHz delivers a differential signal that rejects common-mode noise over controlled-impedance traces — suited for a SerDes reference or high-speed ADC clock.
Listed as Active — no last-time-buy window to plan around.
Yes — as a MEMS-based XO, it is a drop-in replacement for a quartz crystal oscillator in the same package (6-SMD, 7.0mm x 5.0mm) and output type (LVDS). The MEMS resonator eliminates quartz start-up time and is more shock-tolerant, but the electrical interface is identical: supply voltage, output swing, and enable pin function match the standard XO pinout.