322.265 MHz LVDS clock — MEMS, not quartz
The output is LVDS, so the signal is a differential pair that rejects common-mode noise — runs clean across a PCB with long traces or through a backplane connector. Supply voltage spans 2.25V to 3.63V, covering 2.5V and 3.3V rails without a separate regulator — the oscillator draws 32 mA max from the rail.
Temperature grade and deployment fit
Package and board layout note
Housed in a 6-VDFN package measuring 3.20 mm x 2.50 mm with a seated height of 0.90 mm — the small footprint leaves room for the differential pair routing and the decoupling cap right at the supply pin.
Availability confirmed at RFQ.