Microchip DSC1122DI2-125.0000, XO (Standard) with LVPECL output, 125 MHz, ±25 ppm stability, -40 to 85°C, 6-SMD No Lead, Enable/Disable function
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1122 |
| Mounting | Surface Mount |
| Supply voltage | 2.25V ~ 3.6V |
| Current - supply | 58mA |
| Current - supply (Disable) | 22mA |
| Frequency | 125 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | LVPECL |
| Package | Tube |
| Function | Enable/Disable |
| Base resonator | MEMS |
| Case | 6-SMD, No Lead |
The output is LVPECL, a differential signal that delivers low jitter over long PCB traces or cables. Max current draw is 58 mA when enabled; pulling the Enable/Disable pin low drops it to 22 mA.
The 6-SMD No Lead package measures 2.50 mm x 2.00 mm with a seated height of 0.90 mm, so it fits tight-height enclosures and can be reflowed with standard lead-free profiles.
No — the base resonator is a MEMS structure, not a quartz crystal. This means no quartz aging drift and no cold-start frequency overshoot. The output is LVPECL, a differential signal.
Yes. The function is Enable/Disable. When disabled, the max supply current drops to 22 mA from the 58 mA enabled maximum.
The supply voltage range is 2.25 V to 3.6 V, covering common 2.5 V and 3.3 V rails without an extra regulator.