Microchip DSC1122BE2-150.0000, XO (Standard) MEMS oscillator, 150 MHz LVPECL output, ±25ppm frequency stability, 2.25V~3.6V supply, -20°C~70°C, 6-SMD no-lead package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1122 |
| Mounting | Surface Mount |
| Supply voltage | 2.25V ~ 3.6V |
| Current - supply | 58mA |
| Current - supply (Disable) | 22mA |
| Frequency | 150 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -20°C~70°C |
| Size (Dimension) | 0.197\" L x 0.126\" W (5.00mm x 3.20mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | LVPECL |
| Package | Tube |
| Function | Enable/Disable |
| Base resonator | MEMS |
| Case | 6-SMD, No Lead |
Supply voltage spans 2.25V to 3.6V, so it works off a 2.5V or 3.3V rail without an external LDO.
Housed in a 6-SMD, No Lead package measuring 5.00mm x 3.20mm with a seated height of 0.90mm. The 0.197" x 0.126" footprint is common across the DSC1122 series, so a layout designed for the 150 MHz variant accepts any frequency in the family with the same pinout.
Yes, if the existing quartz XO is a 150 MHz LVPECL device in a 6-SMD 5.0x3.2mm footprint. The MEMS base resonator provides better vibration tolerance and faster startup, but the electrical interface (LVPECL levels, supply range, enable polarity) must match the original. Verify the enable/disable logic polarity against the legacy part before substituting.