Skip to main content
Microchip Technology DSC1122AI5-125.0000 — Crystals & Oscillators

DSC1122AI5-125.0000 – Microchip 125 MHz LVPECL MEMS

MPNDSC1122AI5-125.0000
Active

Microchip Technology DSC1122AI5-125.0000, a 125 MHz XO (Standard) with LVPECL output, ±10 ppm stability, MEMS resonator, industrial temperature range, 6-SMD package.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1122AI5-125.0000 specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1122
MountingSurface Mount
Voltage2.25V ~ 3.6V
Current - supply58mA
Current - supply (Disable)22mA
Frequency125 MHz
Frequency stability±10ppm
Operating temperature-40°C~85°C
Size (Dimension)0.276\" L x 0.197\" W (7.00mm x 5.00mm)
Height - seated0.035\" (0.90mm)
OutputLVPECL
PackageTube
FunctionEnable/Disable
Base resonatorMEMS
Case6-SMD, No Lead Exposed Pad

Product details

125 MHz LVPECL clock source with MEMS resonator

The DSC1122AI5-125.0000: This is a 125 MHz standard oscillator (XO) from Microchip's DSC1122 family, built around a MEMS resonator instead of a quartz crystal. The LVPECL output delivers the fast edge rates and low jitter needed for high-speed SERDES, FPGA reference clocks, and 10G Ethernet PHY timing. The enable/disable function lets the system gate the clock for power savings — disable current drops to 22 mA max from the 58 mA max active draw.

Frequency stability is held to ±10 ppm across the full temperature range, which keeps the clock edge within tight timing margins for a 125 MHz LVPECL link. The MEMS resonator is inherently more shock- and vibration-tolerant than a quartz crystal — relevant for equipment that ships on a truck or lives near a compressor.

Active lifecycle and sourcing

This is a current-production part suitable for both new designs and ongoing production. Sourced through independent distribution; quoted to order against the BOM quantity.

Frequently asked questions

What is the frequency of DSC1122AI5-125.0000?

The oscillator outputs a 125 MHz clock signal.

What is the closest pin-compatible alternative to DSC1122AI5-125.0000 in this family?

Within the DSC1122 series, any other 6-pin 7x5 mm part with the same supply range and LVPECL output is footprint-compatible. The frequency is the only variable — a different frequency changes the BOM, not the layout.

What output type does DSC1122AI5-125.0000 use?

LVPECL — Low-Voltage Positive Emitter-Coupled Logic. It requires a 50-ohm termination to Vcc-2 V at the receiver, typical for high-speed differential clock distribution.