Skip to main content
Log in
Microchip Technology DSC1121DL2-032.0000 — Crystals & Oscillators

DSC1121DL2-032.0000 MEMS Oscillator

MPNDSC1121DL2-032.0000
Active

Microchip Technology DSC1121DL2-032.0000, XO (Standard) 32 MHz CMOS MEMS oscillator, 2.25V~3.6V supply, ±25ppm stability, -40°C~105°C, AEC-Q100, 6-SMD 2.50mm x 2.00mm package.

$1.1100Ref. price · indicative, final on quote
Microchip Technology DSC1121DL2-032.0000 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1121DL2-032.0000 specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1121
MountingSurface Mount
Voltage2.25V ~ 3.6V
Current - supply35mA
Current - supply (Disable)22mA
Frequency32 MHz
Frequency stability±25ppm
Operating temperature-40°C~105°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTube
RatingsAEC-Q100
FunctionEnable/Disable
Base resonatorMEMS
Case6-SMD, No Lead

Product details

The DSC1121DL2-032.0000 is a 32 MHz MEMS-based oscillator from Microchip's DSC1121 series, delivering a CMOS output over a 2.25V to 3.6V supply range.

The wide supply tolerance (2.25V to 3.6V) means it can run directly from a 3.3V or 2.5V rail without an LDO, saving a component and a decoupling cap.

Enable/Disable function for power-sensitive designs

In a battery-backed ECU or sensor module that sleeps between wake cycles, this saves tens of milliamps that would otherwise drain the reserve capacitor.

The trade-off is that MEMS oscillators typically consume slightly more current than a quartz equivalent at the same frequency, but the 35 mA max draw is well within the budget of most automotive modules.

Housed in a 6-SMD, No Lead package measuring 2.50mm x 2.00mm with a seated height of 0.90mm, this oscillator fits tight PCB stacks in camera modules, ADAS ECUs, or telematics controllers. The 6-pin footprint requires a single ground pour under the body — no thermal pad, no via-in-pad. Standard reflow profile for lead-free solder applies.

Frequently asked questions

Is DSC1121DL2-032.0000 AEC-Q100 qualified?

Yes, it carries AEC-Q100 rating, which qualifies it for automotive applications including under-hood and chassis domains where -40°C to 105°C ambient is required.

Can DSC1121DL2-032.0000 replace a standard 32 MHz quartz oscillator?

Functionally yes — it outputs a 32 MHz CMOS clock with ±25 ppm stability. The MEMS resonator is more vibration-tolerant than quartz, so it can replace a quartz oscillator in designs that need improved reliability. Pin compatibility depends on the specific quartz part's footprint; the 6-SMD, 2.50mm x 2.00mm package is a common size, but verify the pinout matches your layout.