Skip to main content
Microchip Technology DSC1121DL1-025.0000T — Crystals & Oscillators

DSC1121DL1-025.0000T – Microchip MEMS Oscillator, 25 MHz

MPNDSC1121DL1-025.0000T
Active

Microchip Technology DSC1121 series, XO (Standard), 25 MHz, CMOS output, MEMS resonator, 2.25V–3.6V supply, ±50ppm stability, -40°C to 105°C, 6-SMD package, tape & reel.

Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1121DL1-025.0000T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1121
MountingSurface Mount
Supply voltage2.25V ~ 3.6V
Current - supply22mA
Frequency25 MHz
Frequency stability±50ppm
Operating temperature-40°C~105°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTape & Reel (TR)
FunctionEnable/Disable
Base resonatorMEMS
Case6-SMD, No Lead

Product details

A telecom base station or outdoor controller that sees 85°C on a hot day still has 20°C of margin before the part hits its upper limit.

Wide supply range and CMOS drive

The supply voltage spans 2.25V to 3.6V, covering 2.5V and 3.3V logic rails without an external regulator. Maximum supply current is 22 mA at full load, which is typical for a 25 MHz MEMS oscillator.

6-SMD package and board layout

Housed in a 6-SMD, no-lead package measuring 2.50 mm x 2.00 mm with a seated height of 0.90 mm. The no-lead construction means the thermal and electrical connection is through the bottom pads; the PCB land pattern should match the manufacturer's recommended footprint for reliable solder joints.

Frequently asked questions

Is the DSC1121DL1-025.0000T obsolete?

No. The product status is Active.

What is the difference between DSC1121DL1 and DSC1121DL2?

Both are part of the DSC1121 series. The difference is in the output drive strength or frequency tolerance variant — the datasheet specifies the exact ordering options. For the DSC1121DL1-025.0000T, the key parameters are 25 MHz, ±50 ppm stability, and CMOS output with enable/disable.