Skip to main content
Log in
Microchip Technology DSC1121DI1-060.0000T — Crystals & Oscillators

DSC1121DI1-060.0000T MEMS XO – 60 MHz, AEC-Q100, CMOS Output

MPNDSC1121DI1-060.0000T
End of Life

Microchip DSC1121DI1-060.0000T, MEMS-based XO (Standard), 60 MHz fixed frequency, CMOS output, AEC-Q100 qualified, 2.25V–3.6V supply, -40°C to 85°C, 6-SMD no-lead 2.50mm x 2.00mm package.

Microchip Technology DSC1121DI1-060.0000T datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1121DI1-060.0000T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1121
MountingSurface Mount
Supply voltage2.25V ~ 3.6V
Current - supply35mA
Current - supply (Disable)22mA
Frequency60 MHz
Frequency stability±50ppm
Operating temperature-40°C ~ 85°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
RatingsAEC-Q100
FunctionEnable/Disable
PackageTape & Reel (TR)
Base resonatorMEMS
Case6-SMD, No Lead

Product details

60 MHz MEMS clock with AEC-Q100 qualification

Operates from 2.25V to 3.6V, covering common 2.5V and 3.3V logic rails without a separate regulator.

Package and board-fit

Housed in a 6-SMD no-lead package measuring 2.50mm x 2.00mm with a seated height of 0.90mm. The compact footprint suits space-constrained designs, but the no-lead terminations mean the pad layout must match the recommended land pattern — a standard 6-pin QFN-style footprint works. No through-hole or leaded variant; reflow-only assembly.

Frequently asked questions

Is the DSC1121DI1-060.0000T AEC-Q100 qualified?

Yes, the DSC1121DI1-060.0000T carries an AEC-Q100 rating, meaning it has passed automotive-grade qualification tests including temperature cycling, ESD, and latch-up. This qualifies it for use in automotive electronics such as engine control units, transmission controllers, and ADAS modules.

What package size does the DSC1121DI1-060.0000T use?

The small footprint is suited for compact PCBs, but the no-lead terminations require a QFN-style land pattern — confirm the pad layout matches the recommended footprint before layout.

Does the DSC1121DI1-060.0000T have a direct replacement or second source?

No pin-compatible second source or direct replacement is listed in the Microchip documentation. The DSC1121 series is the sole reference. If a second source is required, a functionally equivalent MEMS oscillator from another vendor would need a different order code and possibly a different footprint — verify compatibility before substitution.