For a 30 MHz clock feeding a CAN-FD controller or an Ethernet PHY, this eliminates the startup-margin and drive-level calculations that quartz designs require.
Automotive and military temperature deployment
CMOS output drives up to 35 mA max, enough to fan out to two or three loads on a short PCB trace without a buffer.
Enable/Disable for power and EMI control
Frequency stability over temperature
±50 ppm frequency stability across the full -55°C to +125°C range means the 30 MHz output stays within 1.5 kHz of nominal — tight enough for most serial communication links (CAN-FD, SPI, UART) without a separate TCXO. The MEMS resonator's aging characteristic is typically lower than a quartz AT-cut crystal's over the same period.
The 6-SMD no-lead package measures 3.20 mm x 2.50 mm with a seated height of 0.90 mm — a standard 3.2 x 2.5 mm oscillator footprint that matches many quartz XO layouts. Surface-mount reflow profile follows standard lead-free solder profiles; no special bake-out required before assembly.