Active production — MEMS oscillator for automotive and industrial timing
AEC-Q100 qualification means this part is validated for automotive-grade reliability — suitable for under-hood or cabin electronics where vibration and thermal cycling are routine. The MEMS resonator replaces a quartz crystal inside the package, offering better shock and vibration tolerance than a traditional crystal oscillator, with a standard 6-SMD no-lead footprint that reflows on the same profile as a quartz XO.
Supply voltage range and power budget for rail planning
Operating from 2.25V to 3.6V, this oscillator spans the 2.5V and 3.3V logic rails without a separate regulator — the wide input range absorbs ±10% rail tolerance and ripple. Maximum supply current is 35 mA when enabled; the disable function drops consumption to 22 mA max, which helps meet standby power targets in automotive body controllers.
Package, footprint, and reflow considerations
Housed in a 6-SMD no-lead package measuring 5.00 mm x 3.20 mm with a seated height of 0.90 mm — the same footprint as many standard quartz oscillators, so the PCB layout does not change when substituting a MEMS device.