Skip to main content
Microchip Technology DSC1121AM2-041.5000T — Crystals & Oscillators

DSC1121AM2-041.5000T MEMS XO 41.5 MHz CMOS -55 to 125°C

MPNDSC1121AM2-041.5000T
Active

Microchip DSC1121 series, XO (Standard) MEMS oscillator, 41.5 MHz CMOS output, ±25ppm stability, 2.25V–3.6V supply, -55 to +125°C, 6-VDFN exposed pad package.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1121AM2-041.5000T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1121
MountingSurface Mount
Voltage2.25V ~ 3.6V
Current - supply35mA
Current - supply (Disable)22mA
Frequency41.5 MHz
Frequency stability±25ppm
Operating temperature-55°C ~ 125°C
Size (Dimension)0.276\" L x 0.197\" W (7.00mm x 5.00mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTape & Reel (TR)
FunctionEnable/Disable
Base resonatorMEMS
Case6-VDFN Exposed Pad

Product details

A satellite payload or a missile guidance computer that sees -55°C on ascent and +125°C near the engine can use this part without a separate temperature-compensated can.

Supply flexibility and enable logic

The supply range spans 2.25V to 3.6V — one rail for 2.5V and 3.3V logic families. No second LDO needed when the board has both voltage domains; the oscillator runs from whichever rail is cleaner. The disable current max is 22 mA, compared to 35 mA max when running — useful for battery-powered gear that sleeps between transmissions.

Housed in a 6-VDFN with exposed pad, 7.00 mm x 5.00 mm footprint, seated height 0.90 mm max. Surface-mount on tape and reel — the 0.90 mm height fits under a mezzanine board or inside a compact enclosure without a clearance spacer.

Product status is Active per Microchip.

Frequently asked questions

Is the DSC1121AM2-041.5000T a drop-in replacement for a standard 41.5 MHz quartz oscillator?

Yes, functionally. The DSC1121AM2-041.5000T is a MEMS XO with CMOS output and the same 2.5V–3.3V supply range as most quartz oscillators. However, the 6-VDFN package footprint (7.00 mm x 5.00 mm) differs from common 5.0 mm x 3.2 mm or 7.0 mm x 5.0 mm quartz packages — confirm the pad layout on your board before substituting.

What supply voltage does the DSC1121AM2-041.5000T accept?

It accepts 2.25V to 3.6V, covering both 2.5V and 3.3V logic rails. The Enable/Disable function is active-low or active-high depending on the configuration — check the DSC1121 datasheet for the logic threshold relative to Vdd.