Microchip Technology DSC1121AM2-040.0000T, a 40 MHz MEMS-based XO (Standard) with CMOS output, AEC-Q100 qualification, and a wide 2.25V–3.6V supply range in a 7.00mm x 5.00mm 6-SMD package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1121 |
| Mounting | Surface Mount |
| Supply voltage | 2.25V ~ 3.6V |
| Current - supply | 35mA |
| Current - supply (Disable) | 22mA |
| Frequency | 40 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -55°C~125°C |
| Size (Dimension) | 0.276\" L x 0.197\" W (7.00mm x 5.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Enable/Disable |
| Base resonator | MEMS |
| Case | 6-SMD, No Lead Exposed Pad |
The supply voltage spans 2.25V to 3.6V, so a single oscillator works on a 2.5V or 3.3V rail without an intermediate regulator; the Enable/Disable function pulls the output to high-Z, cutting supply current to 22 mA max when the clock is gated.
Housed in a 6-SMD, No Lead Exposed Pad package measuring 7.00mm x 5.00mm with a seated height of 0.90mm, this oscillator is a drop-in replacement for standard 7x5 mm crystal oscillators — the same footprint, no board spin.
Yes — the 7.00mm x 5.00mm 6-SMD package and CMOS output make it footprint- and function-compatible with standard 7x5 mm crystal oscillators. The MEMS resonator inside is more shock-resistant than quartz, so it handles vibration environments better, but the electrical interface is identical.
Yes — the supply voltage range of 2.25V to 3.6V covers both 2.5V and 3.3V rails directly. No external LDO or level shifter is needed.