Frequency stability is ±50ppm across the operating range, which is adequate for general-purpose clocking of MCUs, FPGAs, and serial interfaces where tighter ppm (e.g., ±25ppm) is not required for the protocol timing budget.
Supply voltage and power-saving Enable/Disable
The supply voltage range spans 2.25V to 3.6V, covering 2.5V and 3.3V logic rails without an external regulator — a single-rail BOM simplification when the board already runs one of those voltages. The Enable/Disable function (pin-controlled) reduces current draw from 35 mA max (enabled) to 22 mA max (disabled).
Housed in a 6-VDFN Exposed Pad package measuring 7.00 mm x 5.00 mm, 0.90 mm seated height.
This is a current production part suitable for new designs — no last-time-buy or NRND constraints.