Microchip DSC1104NI2-100.0000, XO (Standard) MEMS oscillator, 100 MHz, HCSL output, ±25ppm stability, 2.25V–3.6V supply, 6-SMD no-lead package, -40°C to 85°C.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1104 |
| Mounting | Surface Mount |
| Supply voltage | 2.25V ~ 3.6V |
| Current - supply | 42mA |
| Current - supply (Disable) | 95µA |
| Frequency | 100 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.276\" L x 0.197\" W (7.00mm x 5.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | HCSL |
| Package | Tube |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 6-SMD, No Lead |
Its ±25 ppm frequency stability holds the clock edge jitter within tight timing windows, and the wide supply range of 2.25V to 3.6V lets it run directly off a 2.5V or 3.3V rail without a separate LDO.
Active current draw is 42 mA max at full 100 MHz operation, typical for a high-speed HCSL driver.
Submit an RFQ with your target quantity.
Yes — the MEMS resonator is a drop-in replacement for a quartz XO in the same 6-SMD, 7.0×5.0 mm footprint, with the advantage of ±25 ppm stability across -40°C to 85°C and a wider supply range. Confirm the output logic: this part drives HCSL, not LVCMOS, so the receiver must accept differential HCSL levels.
When the Standby (Power Down) function is asserted, the supply current drops to 95 µA maximum — low enough to leave the oscillator connected to a battery rail without draining the cell during sleep.