Active MEMS XO at 100 MHz with HCSL drive
Supply voltage spans 2.25V to 3.6V, so it runs from a 2.5V or 3.3V rail without an external regulator; the 42 mA max supply current covers the HCSL output stage and the MEMS PLL core.
Commercial temp grade and ±25 ppm stability
Frequency stability of ±25 ppm across the full temperature range means the 100 MHz clock stays within 2500 Hz of nominal — tight enough for a 1 GbE reference or a PCIe Gen 1/2 spread-spectrum clock, but check the jitter budget if the downstream SERDES requires sub-1 ps RMS phase noise.
6-SMD package and board layout note
Housed in a 6-SMD, No Lead package measuring 5.00 mm × 3.20 mm with a seated height of 0.90 mm — the same footprint as many quartz oscillators in this form factor, so a layout swap from a quartz XO to this MEMS part often requires only a BOM change, not a board spin.
Active production — sourced per RFQ
No stock-holding claim — quoted to order.