Microchip DSC1103 series XO (Standard) MEMS oscillator, 125 MHz LVDS output, ±10 ppm stability, -40°C to 105°C, 6-SMD No Lead package, Tape & Reel
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1103 |
| Mounting | Surface Mount |
| Supply voltage | 2.25V ~ 3.63V |
| Current - supply | 32mA |
| Current - supply (Disable) | 95µA |
| Frequency | 125 MHz |
| Frequency stability | ±10ppm |
| Operating temperature | -40°C ~ 105°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | LVDS |
| Package | Tape & Reel (TR) |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 6-SMD, No Lead |
The DSC1103DL5-125.0000T is an active-production XO (Standard) MEMS oscillator delivering a 125 MHz LVDS output from a 6-SMD No Lead package measuring 2.50 mm x 2.00 mm. Supply voltage spans 2.25V to 3.63V, so it can run from a 2.5V or 3.3V rail without an extra LDO.
This is an active Microchip part.
Yes, if the board expects an LVDS input and the supply voltage is within 2.25V to 3.63V. The MEMS resonator is a drop-in alternative to quartz in the same 6-SMD footprint, with the added benefit of ±10 ppm stability over the industrial temperature range.