Microchip DSC1103DI2-100.0000, XO (Standard), 100 MHz LVDS output, MEMS base resonator, ±25ppm stability, -40°C to 85°C, 2.25V-3.63V supply, 6-SMD no-lead package, standby function, 32mA max supply current, 95µA max disable current.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1103 |
| Mounting | Surface Mount |
| Supply voltage | 2.25V ~ 3.63V |
| Current - supply | 32mA |
| Current - supply (Disable) | 95µA |
| Frequency | 100 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | LVDS |
| Package | Tube |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 6-SMD, No Lead |
The DSC1103DI2-100.0000: Supply voltage spans 2.25V to 3.63V, max current draw 32mA; standby (Power Down) function drops consumption to 95µA max — no external load capacitors needed on the output.
No external load capacitors are required on the LVDS output — the MEMS resonator and on-chip PLL set the frequency internally.
No. Because the output is LVDS and the frequency is generated by an internal MEMS resonator with on-chip PLL, no external load capacitors are needed on the output pins.