Microchip DSC1103 series MEMS-based XO (Standard), 150.0000 MHz, LVDS output, ±50 ppm stability, 6-SMD No Lead package, -40°C to +105°C operation.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1103 |
| Mounting | Surface Mount |
| Supply voltage | 2.25V ~ 3.63V |
| Current - supply | 32mA |
| Current - supply (Disable) | 95µA |
| Frequency | 150 MHz |
| Frequency stability | ±50ppm |
| Operating temperature | -40°C~105°C |
| Size (Dimension) | 0.197\" L x 0.126\" W (5.00mm x 3.20mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | LVDS |
| Package | Tube |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 6-SMD, No Lead |
This DSC1103BL1-150.0000 is a MEMS-based XO (Standard) delivering a fixed 150 MHz LVDS output from a 2.25 V to 3.63 V supply rail.
Housed in a 6-SMD No Lead package measuring 5.00 mm x 3.20 mm with a seated height of 0.90 mm. The 0.197" x 0.126" footprint is common across the DSC1103 series — if you already have a layout for a sibling frequency, this part drops onto the same pads.
Yes. The supply voltage range is 2.25 V to 3.63 V, so a 3.3 V rail sits comfortably within the operating window. The LVDS output levels track the supply; at 3.3 V the differential swing is well within the LVDS receiver input range.
The datasheet for the DSC1103 series defines the Standby function as active-low. When the pin is pulled low the oscillator powers down; when left floating or pulled high it runs. A 10 kΩ pull-up to Vdd is a safe default if the system does not actively drive the pin.