Rated across -40 to +85°C with ±25 ppm frequency stability, it fits industrial environments like outdoor telecom base stations, factory-floor Ethernet switches, and engine-bay control modules where temperature swings are routine.
Supply range and standby power-down
Operates from a 2.25 V to 3.63 V supply — covers the common 2.5 V and 3.3 V logic rails without an extra regulator. Active current draw is 32 mA max at 250 MHz — a clean figure for a 6-pin SMD oscillator; the LVDS output swings differentially, so the receiver sees a tight voltage swing with good noise immunity over twisted-pair or PCB traces.
Housed in a 6-SMD No Lead Exposed Pad package measuring 7.00 mm x 5.00 mm, seated height 0.90 mm. The footprint matches the standard 7.0 x 5.0 mm oscillator land pattern used across the DSC1103 family; if you have a layout for a quartz oscillator in the same package, this MEMS part drops in without a board spin.
Listed as Active by Microchip Technology — no last-time-buy window, no NRND flag.