Microchip Technology DSC1102CI5-062.5000, MEMS-based XO (Standard), LVPECL output, 62.5 MHz, ±10 ppm stability, 2.25-3.6 V supply, -40 to +85°C, 6-SMD no-lead package
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1102 |
| Mounting | Surface Mount |
| Supply voltage | 2.25V ~ 3.6V |
| Current - supply | 58mA |
| Current - supply (Disable) | 95µA |
| Frequency | 62.5 MHz |
| Frequency stability | ±10ppm |
| Operating temperature | -40°C ~ 85°C |
| Size (Dimension) | 0.126\" L x 0.098\" W (3.20mm x 2.50mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | LVPECL |
| Package | Tube |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 6-SMD, No Lead |
Housed in a 6-SMD, No Lead package measuring 3.20 mm x 2.50 mm with a seated height of 0.90 mm — the same footprint as many quartz oscillators, so the MEMS part drops into an existing 6-pad land pattern without a board spin.
LVPECL — a differential, positive-referenced emitter-coupled logic output. It requires a 50-ohm termination to Vdd – 2 V (typically a Thevenin pair) and is commonly used to drive FPGA clock inputs or high-speed ADC/DAC reference clocks.
2.25 V to 3.6 V. The LVPECL output swing is proportional to Vdd, so termination values must be adjusted if the rail changes.
Yes, the function is Standby (Power Down). The disable current is 95 µA maximum, compared to 58 mA maximum in active mode. This lets a battery-powered system gate the oscillator without an external load switch.