Microchip Technology DSC1102AE5-412.5000, DSC1102 series, XO (Standard) MEMS oscillator, 412.5 MHz LVPECL output, ±10 ppm stability, 2.25V~3.6V supply, 58 mA max, -20°C~70°C, 6-SMD no-lead exposed pad.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1102 |
| Mounting | Surface Mount |
| Supply voltage | 2.25V ~ 3.6V |
| Current - supply | 58mA |
| Current - supply (Disable) | 95µA |
| Frequency | 412.5 MHz |
| Frequency stability | ±10ppm |
| Operating temperature | -20°C~70°C |
| Size (Dimension) | 0.276\" L x 0.197\" W (7.00mm x 5.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | LVPECL |
| Package | Tube |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 6-SMD, No Lead Exposed Pad |
Supply voltage spans 2.25V to 3.6V, so it runs off a 3.3V or 2.5V rail without an extra LDO — the 58 mA max supply current at 412.5 MHz is typical for a MEMS LVPECL part at this frequency.
When the part is disabled, the LVPECL outputs go into a high-Z state, so the downstream receiver isn't forced to a rail — no pull-up resistors needed on the disable path.
Yes. The supply voltage range is 2.25V to 3.6V, so a 3.3V rail is within spec. The 412.5 MHz LVPECL output levels are referenced to that supply voltage.
Yes. The part includes a Standby (Power Down) function. When asserted, the LVPECL outputs go high-impedance and the supply current drops to 95 µA max.