Skip to main content
Log in
Microchip Technology DSC1101NI5-100.0000 — Crystals & Oscillators

DSC1101NI5-100.0000 MEMS XO – 100 MHz CMOS, ±10 ppm, Active

MPNDSC1101NI5-100.0000
Active

Microchip DSC1101NI5-100.0000, MEMS-based XO (Standard), 100 MHz CMOS output, ±10 ppm stability, 2.25V–3.6V supply, -40°C to 85°C, 6-SMD no-lead package, standby function.

Microchip Technology DSC1101NI5-100.0000 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1101NI5-100.0000 specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1101
MountingSurface Mount
Supply voltage2.25V ~ 3.6V
Current - supply35mA
Current - supply (Disable)95µA
Frequency100 MHz
Frequency stability±10ppm
Operating temperature-40°C~85°C
Size (Dimension)0.276\" L x 0.197\" W (7.00mm x 5.00mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTube
FunctionStandby (Power Down)
Base resonatorMEMS
Case6-SMD, No Lead

Product details

100 MHz MEMS oscillator – what it replaces

The DSC1101NI5-100.0000 is a MEMS-based XO (Standard) that outputs a 100 MHz CMOS clock from a 2.25V to 3.6V supply rail – the wide voltage range lets it drop into 2.5V or 3.3V clock trees without a separate regulator.

Standby power and disable current

The 6-SMD no-lead package measures 7.00 mm x 5.00 mm with a seated height of 0.90 mm – a standard 7×5 mm oscillator footprint that matches many quartz XO pads, so a board laid out for a 7×5 mm crystal oscillator can accept this MEMS part without a layout change. Surface-mount assembly with no exposed pad – the six pads are on the perimeter; no thermal via or slug-soldering step is needed.

Frequently asked questions

Is the DSC1101NI5-100.0000 a direct replacement for a standard 100 MHz quartz CMOS oscillator?

Yes – the 100 MHz CMOS output, ±10 ppm stability, 2.25V–3.6V supply, and 7×5 mm 6-SMD footprint are all common to standard quartz XOs in this form factor. The MEMS resonator adds faster startup and better shock tolerance, but the electrical interface is a drop-in replacement for a 100 MHz CMOS oscillator with the same package and pinout.