Microchip Technology DSC1101NI5-012.8000, XO (Standard) MEMS oscillator, 12.8 MHz CMOS output, ±10 ppm stability, -40°C to 85°C, 2.25V-3.6V supply, Standby (Power Down) function, 6-VDFN package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1101 |
| Mounting | Surface Mount |
| Supply voltage | 2.25V ~ 3.6V |
| Current - supply | 35mA |
| Frequency | 12.8 MHz |
| Frequency stability | ±10ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.276\" L x 0.197\" W (7.00mm x 5.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 6-VDFN |
It operates from a wide 2.25V to 3.6V supply, making it a drop-in fit for 2.5V or 3.3V logic rails without an extra regulator. The MEMS base resonator gives it better shock and vibration tolerance than a quartz crystal, and the 6-VDFN package (7.00mm x 5.00mm) is hand-solderable with a fine-tip iron — no hot-air rework needed.
When active, the oscillator draws a maximum of 35 mA, which is typical for a 12.8 MHz CMOS output driving a moderate load.
Yes, the part is RoHS compliant per Microchip's standard material declaration.
Yes, it has a Standby (Power Down) function that reduces current consumption to near zero when the oscillator is not needed.
Frequency stability is ±10 ppm over the full operating temperature range.