Microchip Technology DSC1101NI2-048.0000T, XO (Standard) MEMS oscillator, 48 MHz CMOS output, ±25 ppm stability, 2.25V–3.6V supply, -40°C to 85°C, 6-SMD no-lead package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1101 |
| Mounting | Surface Mount |
| Supply voltage | 2.25V ~ 3.6V |
| Current - supply | 35mA |
| Current - supply (Disable) | 95µA |
| Frequency | 48 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.276\" L x 0.197\" W (7.00mm x 5.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 6-SMD, No Lead |
The wide supply range of 2.25V to 3.6V lets it run directly from a 2.5V or 3.3V rail without an intermediate LDO — one less part on the BOM.
Housed in a 7.00 mm × 5.00 mm × 0.90 mm 6-SMD no-lead package — a standard footprint that matches many quartz oscillator land patterns, so a board designed for a quartz XO can often accept this MEMS part without a layout change.
This part is sourced to order through independent distribution. Submit an RFQ for your target quantity and we will quote against it.
CMOS — a single-ended square-wave output that drives standard logic inputs directly. No external termination or level translation is needed for most 3.3V or 2.5V logic families.