25 MHz MEMS oscillator for industrial timing
Unlike quartz crystal oscillators, the MEMS resonator is inherently more resistant to shock and vibration — a practical advantage for motor drives, outdoor telecom enclosures, and factory-floor controllers where mechanical stress can pull a quartz fundamental off frequency.
Supply voltage and power-down flexibility
The wide supply range of 2.25V to 3.6V lets this oscillator run directly from a 2.5V or 3.3V rail without an intermediate LDO — one less component in the timing tree. A Standby (Power Down) function drops the supply current to 95 µA max when the enable pin is de-asserted, versus 35 mA max during active oscillation. For battery-powered or intermittently-sleeping equipment, this gate saves meaningful standby power.
Housed in a 6-VDFN package measuring 7.00mm x 5.00mm x 0.90mm, the DSC1101NI2-025.0000T occupies a compact footprint on the PCB. The surface-mount package is supplied on Tape & Reel, compatible with standard pick-and-place assembly. The VDFN package includes an exposed thermal pad on the bottom — the datasheet recommends soldering this pad to a PCB ground plane to improve thermal dissipation and reduce supply-noise coupling into the output clock.
It is suitable for both new designs and ongoing production. No stock-holding claim — quoted to order.