Microchip DSC1101 series MEMS-based XO (Standard), 25 MHz CMOS output, ±25 ppm stability, 2.25 V–3.6 V supply, Standby (Power Down) function, -55°C to 125°C, 6-VDFN package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1101 |
| Mounting | Surface Mount |
| Supply voltage | 2.25V ~ 3.6V |
| Current - supply | 35mA |
| Current - supply (Disable) | 95µA |
| Frequency | 25 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -55°C~125°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 6-VDFN |
A Standby (Power Down) function on pin 1 (OE/ST) drops the supply current to 95 µA max when pulled low, compared to 35 mA max during active oscillation — a 370× reduction that lets a battery-powered sensor node gate the clock tree between measurement cycles. The 6-VDFN package (2.50 mm × 2.00 mm, 0.90 mm seated height) saves board area in space-constrained designs like handheld test gear or compact radio modules.
The CMOS output swings rail-to-rail at that supply.
Yes — the Standby (Power Down) function disables the output and reduces supply current to 95 µA max when the enable pin is pulled low.