MEMS oscillator for wide-temperature timing
Supply voltage spans 2.25V to 3.6V, covering both 2.5V and 3.3V logic rails without an external LDO — one BOM line serves multiple power domains. Frequency stability is ±50ppm over the full temperature and voltage range, tight enough for most MCU clock inputs and serial-communication timing references.
Standby power-down for battery-sensitive designs
A Standby (Power Down) function drops supply current to 95µA max when the enable pin is de-asserted — useful for battery-powered sensors or IoT nodes that sleep between transmissions and wake on an external event. Active current consumption is 35mA max at 33.3333 MHz, typical for a high-frequency CMOS-output oscillator driving a standard load.
Package and board-fit note
Housed in a 6-VDFN package measuring 2.50mm x 2.00mm with a seated height of 0.90mm — a compact footprint that fits dense PCB layouts without sacrificing thermal or mechanical reliability.
Product status is Active per the manufacturer — no NRND or EOL notice; suitable for both new designs and ongoing production builds.