30.24 MHz MEMS oscillator for precision clocking
Its 2.25V to 3.6V supply range means it runs directly off 2.5V, 3.0V, or 3.3V rails without an extra LDO — a clean fit for mixed-voltage designs. The MEMS resonator base gives it better shock and vibration tolerance than a quartz crystal, and the 6-VDFN package (2.50mm x 2.00mm footprint) saves board space.
Supply voltage and power-down standby
The wide 2.25V to 3.6V operating range covers common logic supply voltages, so you can drop this oscillator into a 3.3V FPGA clock tree or a 2.5V MCU without re-spinning the power rail. Active current draw is 35 mA max at full speed, typical for a 30 MHz CMOS-output MEMS oscillator.
The 6-VDFN package (2.50mm x 2.00mm, 0.90mm seated height) is a small no-lead package with exposed pads on the bottom — rework with hot air is straightforward if you preheat the board to 150°C and use a fine-tip nozzle to avoid lifting the adjacent passives.