Microchip Technology DSC1101DI5-025.0000, XO (Standard) MEMS oscillator, 25 MHz CMOS output, ±10 ppm APR, 2.25V–3.6V supply, -40 to 85°C, 6-VDFN package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1101 |
| Mounting | Surface Mount |
| Supply voltage | 2.25V ~ 3.6V |
| Current - supply | 35mA |
| Current - supply (Disable) | 95µA |
| Frequency | 25 MHz |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 6-VDFN |
| Absolute pull range | ±10ppm |
The supply voltage spans 2.25V to 3.6V, so the same BOM line works on 2.5V, 3.0V, or 3.3V rails without a dedicated regulator or level shifter.
Housed in a 6-VDFN package measuring 2.50 mm x 2.00 mm with a seated height of 0.90 mm. The 0.50 mm pitch and small footprint demand careful decoupling placement — a 0.1 µF ceramic within 2 mm of the supply pin keeps the MEMS PLL clean.
Functionally yes — it outputs a 25 MHz CMOS clock with ±10 ppm APR. The MEMS resonator is more resistant to vibration and shock than quartz, but the pinout and footprint (6-VDFN) differ from common 4-pin quartz oscillators. Check the 6-VDFN land pattern against your existing PCB layout before substituting.
Yes, the function is listed as Standby (Power Down). When disabled, the supply current drops to 95 µA max, allowing the oscillator to be gated off in low-power sleep states.