Skip to main content
Log in
Microchip Technology DSC1101DI5-024.0000T — Crystals & Oscillators

DSC1101DI5-024.0000T MEMS Oscillator – 24 MHz, CMOS

MPNDSC1101DI5-024.0000T
Active

Microchip DSC1101DI5-024.0000T, XO (Standard) MEMS oscillator, 24 MHz CMOS output, 2.25V–3.6V supply, -40°C to 85°C, 6-VDFN package.

Microchip Technology DSC1101DI5-024.0000T datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1101DI5-024.0000T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1101
MountingSurface Mount
Supply voltage2.25V ~ 3.6V
Current - supply35mA
Current - supply (Disable)95µA
Frequency24 MHz
Operating temperature-40°C~85°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTape & Reel (TR)
FunctionStandby (Power Down)
Base resonatorMEMS
Case6-VDFN
Absolute pull range±10ppm

Product details

The DSC1101DI5-024.0000T is a 24 MHz MEMS-based XO (Standard) oscillator from Microchip's DSC1101 series, delivering a CMOS output over a 2.25V to 3.6V supply range. The 6-VDFN package (2.50mm x 2.00mm, 0.90mm seated height) suits space-constrained PCBs; the 0.50mm pitch demands careful fan-out on two-layer boards.

Standby mode and supply current

The wide supply range (2.25V–3.6V) lets the oscillator run directly from a 2.5V or 3.3V rail without an external LDO, simplifying the power tree.

The base product number DSC1101 covers multiple frequency and stability variants; pin compatibility across the family means a frequency change does not require a PCB layout revision.

Frequently asked questions

Does DSC1101DI5-024.0000T have a standby mode and what is its current consumption?

Yes, the Standby (Power Down) function draws 95 µA max when disabled, versus 35 mA max during active operation.

Is DSC1101DI5-024.0000T pin compatible with other DSC1101 variants?

Yes, all DSC1101-series oscillators share the same pinout and 6-VDFN footprint, so a frequency or stability change does not require a PCB layout revision.