Skip to main content
Log in
Microchip Technology DSC1101DI5-016.0000T — Crystals & Oscillators

DSC1101DI5-016.0000T 16 MHz MEMS XO CMOS ±10 ppm - Microchip

MPNDSC1101DI5-016.0000T
Active

Microchip DSC1101 series MEMS XO (Standard), 16 MHz, CMOS output, ±10 ppm frequency stability, 2.25 V to 3.6 V supply, -40°C to 85°C industrial temperature, 6-VDFN package, standby (power-down) function.

Microchip Technology DSC1101DI5-016.0000T datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1101DI5-016.0000T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1101
MountingSurface Mount
Voltage2.25V ~ 3.6V
Current - supply35mA
Current - supply (Disable)95µA
Frequency16 MHz
Frequency stability±10ppm
Operating temperature-40°C~85°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTape & Reel (TR)
FunctionStandby (Power Down)
Base resonatorMEMS
Case6-VDFN

Product details

16 MHz MEMS clock source with standby

The DSC1101DI5-016.0000T: The MEMS resonator eliminates the quartz crystal start-up time — the oscillator is stable within microseconds of power-on, which matters for applications that cycle the clock tree to save energy.

Standby mode and supply flexibility

A dedicated Standby (Power Down) pin drops the supply current to 95 µA max when the clock is not needed, while the active mode draws 35 mA max — the standby current is low enough to leave the oscillator powered during a system sleep state without draining the battery. The supply voltage range spans 2.25 V to 3.6 V, covering common 2.5 V and 3.3 V logic rails without an external regulator.

Package and board-fit note

Housed in a 6-VDFN package measuring 2.50 mm x 2.00 mm with a seated height of 0.90 mm — the small footprint suits space-constrained designs, though the VDFN land pattern requires careful solder-paste stencil aperture to avoid tombstoning during reflow.

Frequently asked questions

Where can I buy DSC1101DI5-016.0000T?

This part is sourced to order through independent distribution. Submit an RFQ for the DSC1101DI5-016.0000T with your target quantity; our desk confirms availability and pricing at quote time.

What is the output type of DSC1101DI5-016.0000T?

The output is CMOS, which is a single-ended logic-level signal compatible with most MCU clock inputs, Ethernet PHYs, and FPGA reference clock pins.

Does DSC1101DI5-016.0000T have a standby mode?

Yes, the device includes a Standby (Power Down) function. When asserted, the output is disabled and the supply current drops to 95 µA max, allowing the system to shut the clock tree without removing power from the oscillator.