Microchip DSC1101DI3-012.0000T, XO (Standard) MEMS oscillator, 12 MHz, CMOS output, ±20 ppm APR, 6-VDFN package, -40°C to 85°C, active production.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1101 |
| Mounting | Surface Mount |
| Supply voltage | 2.25V ~ 3.6V |
| Current - supply | 35mA |
| Current - supply (Disable) | 95µA |
| Frequency | 12 MHz |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 6-VDFN |
| Absolute pull range | ±20ppm |
Its ±20 ppm absolute pull range (APR) holds the frequency tight enough for USB full-speed, 10/100 Ethernet, and most MCU PLLs — no external trimming needed.
Housed in a 6-VDFN package measuring 2.50mm x 2.00mm with a seated height of 0.90mm, it saves board space compared to a can-type oscillator — but the 0.50 mm pitch pads need a clean stencil and good solder-paste volume to avoid opens.
Functionally yes — it outputs a 12 MHz CMOS clock with ±20 ppm APR and runs from 2.25V to 3.6V. But the 6-VDFN package has a different footprint than a standard 4-pad DIP-8 or SMD can oscillator. Check your PCB land pattern before swapping.
Yes — the standby (power-down) function disables the output and drops supply current to 95 µA max, letting you gate the clock in battery-powered or low-power applications without an external enable circuit.