Microchip DSC1101 series, XO (Standard), 12.5 MHz, CMOS output, 2.25V ~ 3.6V supply, -40°C ~ 85°C, 6-VDFN package, Tape & Reel
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1101 |
| Mounting | Surface Mount |
| Supply voltage | 2.25V ~ 3.6V |
| Current - supply | 35mA |
| Current - supply (Disable) | 95µA |
| Frequency | 12.5 MHz |
| Frequency stability | ±50ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 6-VDFN |
The DSC1101DI1-012.5000T is a MEMS-based XO (Standard) from Microchip's DSC1101 series, delivering a 12.5 MHz CMOS output.
Runs on a 2.25V to 3.6V supply, so it can sit on a 2.5V or 3.3V rail without an extra regulator.
For a battery-powered sensor that sleeps most of the time, this keeps the quiescent draw low enough to avoid a separate load switch.
Housed in a 6-VDFN package measuring 2.50mm x 2.00mm with a seated height of 0.90mm.
Suitable for new designs.
Output is CMOS. Package is a 6-VDFN measuring 2.50mm x 2.00mm.
Yes, it has a Standby (Power Down) function that reduces supply current to 95µA max when disabled.