MEMS oscillator at 100 MHz — BOM-fit note
Supply range spans 2.25 V to 3.6 V, so the same part works on 2.5 V and 3.3 V rails without an extra regulator — one less line item on the BOM. The 6-VDFN package (2.50 mm × 2.00 mm, 0.90 mm seated height) is a small-footprint surface-mount can — verify the pad layout against the datasheet land pattern before committing the PCB.
Stability and standby — what the ratings mean
Absolute Pull Range (APR) of ±25 ppm defines how far the frequency can be adjusted — tight enough for Ethernet and PCIe reference clocks that need ±50 ppm or better total accuracy. Max supply current is 35 mA at 100 MHz — budget this into the rail's current capacity; the CMOS output drives standard logic loads without a buffer.
Temperature grade and deployment fit
This oscillator belongs in indoor networking gear, test equipment, office peripherals, and telecom racks where ambient stays above freezing.
No official successor or second-source listed — the DSC1101 series is the current production family. For pin-compatible alternatives within the same series, check the DSC1101 product page.