Skip to main content
Log in
Microchip Technology DSC1101DE1-004.0960 — Crystals & Oscillators

DSC1101DE1-004.0960 MEMS XO 4.096 MHz CMOS Oscillator

MPNDSC1101DE1-004.0960
Active

Microchip DSC1101DE1-004.0960, MEMS-based XO (Standard), 4.096 MHz CMOS output, ±50 ppm stability, 2.25V–3.6V supply, 6-VDFN package, standby (power down) function.

Microchip Technology DSC1101DE1-004.0960 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1101DE1-004.0960 specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1101
MountingSurface Mount
Supply voltage2.25V ~ 3.6V
Current - supply35mA
Current - supply (Disable)95µA
Frequency4.096 MHz
Frequency stability±50ppm
Operating temperature-20°C~70°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTube
FunctionStandby (Power Down)
Base resonatorMEMS
Case6-VDFN

Product details

MEMS oscillator for 4.096 MHz clock generation

Supply voltage spans 2.25V to 3.6V, letting it run from a 2.5V or 3.3V rail without an external regulator.

When enabled, the oscillator draws 35 mA max at full swing.

Package and board footprint

Housed in a 6-VDFN package measuring 2.50 mm x 2.00 mm with a seated height of 0.90 mm. The small land pattern suits space-constrained PCBs; the surface-mount package reflows with standard lead-free profiles. No special via-in-pad or thermal management required for this low-power device.

Sourced per RFQ; availability confirmed at quote time.

Frequently asked questions

How can I order DSC1101DE1-004.0960 or check availability?

We source it through independent distribution; submit an RFQ for current pricing and lot-specific availability. No stock-holding claim — confirmed per inquiry.

Is DSC1101DE1-004.0960 a direct replacement for quartz oscillators?

Yes, it is a drop-in functional replacement for a 4.096 MHz quartz oscillator in the same 6-VDFN package and CMOS output. The MEMS resonator provides better shock and vibration tolerance, but the electrical interface — supply voltage, output type, and pinout — is identical. Verify the enable/disable polarity matches your design.

What is the standby current consumption of the DSC1101 series?

When the Standby (Power Down) function is active, the disable current is 95 µA max. The oscillator draws 35 mA max when enabled.

Can DSC1101DE1-004.0960 operate at 1.8V?

No — the supply voltage range is 2.25V to 3.6V. A 1.8V rail is below the minimum; the oscillator will not start or maintain the specified frequency stability outside this range.