Skip to main content
Log in
Microchip Technology DSC1101CM3-024.0000T — Crystals & Oscillators

DSC1101CM3-024.0000T MEMS Oscillator – 24 MHz, CMOS

MPNDSC1101CM3-024.0000T
Active

Microchip DSC1101, XO (Standard), 24 MHz, CMOS, ±20ppm, -55°C to 125°C, 6-SMD, Standby (Power Down), Active

Microchip Technology DSC1101CM3-024.0000T datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1101CM3-024.0000T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1101
MountingSurface Mount
Supply voltage2.25V ~ 3.6V
Current - supply35mA
Current - supply (Disable)95µA
Frequency24 MHz
Frequency stability±20ppm
Operating temperature-55°C~125°C
Size (Dimension)0.126\" L x 0.098\" W (3.20mm x 2.50mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTape & Reel (TR)
FunctionStandby (Power Down)
Base resonatorMEMS
Case6-SMD, No Lead

Product details

The DSC1101CM3-024.0000T is a 24 MHz MEMS-based oscillator from Microchip's DSC1101 series, delivering CMOS output across the full military temperature band of -55°C to 125°C — a range that quartz oscillators typically cannot hold without an oven or a premium TCXO. Supply voltage spans 2.25V to 3.6V, so it runs from a 3.3V or 2.5V rail without a separate regulator — one less part on the BOM.

Standby power-down saves 35mA per clock tree

The 6-SMD no-lead package measures 3.20mm x 2.50mm with a seated height of 0.90mm — a compact footprint that fits tight PCB layouts, though the no-lead land pattern requires careful solder-paste stencil design to avoid tombstoning.

Frequently asked questions

Does DSC1101CM3-024.0000T have a standby (power down) function?

Yes — the standby function pulls the oscillator into a 95µA disable current state, cutting the 35mA operating current when the clock tree is not needed. This is a hardware pin-controlled power-down, not a software register.

Is DSC1101CM3-024.0000T a direct equivalent or replacement for other 24 MHz MEMS oscillators?

The DSC1101CM3-024.0000T is a Microchip-specific order code within the DSC1101 series. Other 24 MHz MEMS oscillators with CMOS output, ±20ppm stability, and -55°C to 125°C range exist (e.g., SiTime parts), but pin compatibility depends on the package footprint and the standby pin assignment — verify the land pattern and function pinout against your board before substitution.